Why your power bank’s mAh is misleading

A power bank labeled 20,000 mAh sounds straightforward: divide that number by your phone battery size and you should know how many charges you’ll get. Then reality shows up. The bank that promised plenty gives a laptop only a partial refill, or charges a phone three times instead of five. The problem is not always fraud. More often, it’s that mAh by itself is an incomplete number—technically true, commercially useful, and deeply misleading when stripped from voltage, conversion loss, and output limits.

The hidden trick: mAh is measured at the cell’s native voltage

Most lithium-ion power banks use cells with a nominal voltage around 3.6V to 3.7V. That huge mAh figure on the box usually refers to the battery cells inside, not the USB output you actually use.

A quick example makes the issue obvious:

  • A 20,000 mAh power bank at 3.7V stores about 74 Wh of energy
  • 20,000 mAh × 3.7V = 74,000 mWh = 74 Wh

But your laptop or phone is charged at 5V, 9V, 12V, 15V, or 20V over USB-C Power Delivery. Once voltage is converted, the equivalent mAh changes. At 5V, that same pack is closer to:

  • 74 Wh ÷ 5V = 14,800 mAh at 5V

Same battery. Very different-looking number.

Watt-hours tell the truth better

If buyers compared Wh instead of mAh, far fewer people would feel cheated. Watt-hours measure actual energy, which is what matters.

Here’s why this matters in the real world:

LabelWhat it often meansMore useful comparison
10,000 mAhAt 3.7V cell voltageAbout 37 Wh
20,000 mAhAt 3.7V cell voltageAbout 74 Wh
24,000 mAhAt 3.7V cell voltageAbout 88.8 Wh

That 74 Wh figure is much more useful than “20,000 mAh” when estimating laptop runtime or airline compliance. For reference, many airlines cap unapproved carry-on batteries at 100 Wh.

Conversion losses eat into the headline number

Even watt-hours are not the whole story. A power bank has to boost or regulate voltage, manage heat, and run control circuitry. No conversion is perfect.

Typical real-world efficiency:

  • 80% to 92% for decent power banks under moderate load
  • Lower efficiency under heavy laptop charging or in hot conditions

So that 74 Wh power bank may deliver only 60 to 68 Wh to your device. If a laptop battery is 60 Wh, “20,000 mAh” does not mean two full charges. Often it means roughly one full charge, maybe a bit more, depending on cable quality, charging profile, and whether the laptop is running at the same time. That gap is where disappointment lives.

Output wattage matters as much as capacity

A second trap: a big mAh number says nothing about how fast energy can be delivered.

A 20,000 mAh bank with 18W output may charge a phone fine and still be nearly useless for a 16-inch laptop that expects 65W, 100W, or more. In that case, the issue is not stored energy but power delivery capability.

This is why two power banks with the same advertised capacity can perform wildly differently:

  • One can sustain a MacBook Pro during a video call
  • Another slowly loses ground while plugged in

Same mAh. Completely different experience.

The honest way to shop

Ignore the biggest number on the packaging for a minute and check these instead:

  • Watt-hours (Wh) for true energy capacity
  • USB-C PD output in watts for laptop compatibility
  • Rated capacity at 5V if the brand publishes it
  • Efficiency claims or third-party tests
  • Device battery size in Wh, not just mAh

If a brand hides Wh, that’s usually not a great sign. Serious manufacturers publish both.

A better question than “How many mAh?”

Ask this instead: How many watt-hours can this bank actually deliver at the voltage my device needs? That question cuts through the marketing fog fast. mAh is not useless, but alone it’s like judging a fuel tank by its shape instead of liters. Looks impressive on the shelf, sure. Less impressive at 7% battery in an airport terminal.

Leave a Reply

Your email address will not be published. Required fields are marked *